Quick start: After Effects
Pick a scene with a few visible light sources. Street lights, illuminated signs, and out-of-focus reflections make it easier to see how the bokeh changes.
1. Apply SPBokeh
Import your footage or image, then search for SPBokeh in the Effects & Presets panel and apply it to the layer. An adjustment layer works too, when that suits your composition.
2. Set the bokeh size
Adjust Radius until the light sources have the size you want. The initial value is 20; radius is scaled relative to a 1080-pixel-high reference frame, so the visible result also depends on the source resolution and any depth-based defocus.
3. Shape the highlights
Try Highlight Power and Highlight Threshold: Power gives bright samples more weight inside each bokeh shape, and Threshold decides which bright samples receive that extra emphasis. These controls are easiest to judge where the footage contains isolated lights.
4. Add the swirl
Increase Swirl Strength to flatten and bend bokeh toward the edges. Use Edge Enhance when you want more of that effect toward the outside of the image. Swirl Transition controls how gradually the distortion develops away from the center.
5. Keep a subject sharp, if needed
Without a depth map or mask, the effect applies basic bokeh across the frame. To control which parts stay sharp, add a depth map or try the Built-in Mask.
6. Choose a render quality
Leave Render Quality on Auto for most work. If you're adjusting an expensive shot interactively, select Preview temporarily. For delivery, use Final or verify which quality Auto selects at the host's output resolution.