Skip to content
SPBokeh Documentation
Buy SPBokeh

Swirl distortion

Platforms
After Effects, Premiere Pro
Depth map
Optional

The characteristic swirl comes from the way bokeh becomes compressed and changes orientation across the frame. Several parameters control how strongly this happens and where it becomes visible.

Set Swirl Strength first

Increase Swirl Strength to make the edge bokeh more compressed and pronounced. At higher values, strong distortion reaches farther toward the center. Use a scene with lights at both the center and the corners so you can judge the balance.

Concentrate the effect near the edges

Edge Enhance makes the radial compression more concentrated toward the outer frame and changes its strength there. Swirl Transition controls the width of the gradual introduction of swirl, beginning near the center. They work on different parts of the distortion, so adjusting one does not replace the other.

Radial compressionEdge EnhanceSwirl Transitioncenteredge 0.25 0.40

Move the optical center

Center in the Swirl group sets the optical origin. It's also used by several lens aberrations, including Cat-eye, Coma, Field Curvature, and Edge Vignette. This is separate from Built-in Mask > Center, which moves the focus mask.

drag

Tilt the orientation

Swirl Bias offsets the orientation of the bokeh along the radial field. Positive and negative values tilt it in opposite directions, within −90° to 90°. For a more neutral starting point, leave Bias at 0°.

−90°0°+90°